Mini Temperature Humidity Testing Chamber
ISO Artificial Climate Control Chamber
Mini Temperature Humidity Test Chamber Product introduction:
The Bench-top temperature and humidity test chamber is widely used in scientific research, research institutes, quality inspection institutes and other industries to do warm and humid heat tests of electronic and electrical products, materials, parts, equipment, etc., alternating heat test and constant temperature test, etc. Also could do high and low temperature routine tests, low temperature storage, in order to evaluate the performance of the sample under given environmental conditions.
Mini Temperature Humidity Test Chamber application:
Apply to aerospace, aviation, electronics, automotive, battery and other products and quality inspection institutes, research institutes, universities and other test units, providing virtual space to simulate the real environment, verify product inspection, research and development results, test chamber is a powerful assistant to shorten the development cycle and improve product quality and reliability.
Mini Temperature Humidity Test Chamber parameters:
| Model | SMC-22-CC |
Temperature | Temperature range | -40℃～150℃ |
| | Temperature fluctuation | ±0.5℃ |
| | Cooling rate | 150.0℃～25.0℃ Cooling rate 2.0～3.0℃/min
25.0℃～-40.0℃ Cooling rate 1.0～2.0℃/min
-40.0℃～60.0℃ Cooling rate0.7～1.5℃/min |
| | Heating rate | -60.0℃～150.0℃ Within about 60 minutes 3.0～5.0℃/min |
| | Temperature uniformity | ±1.0℃ (-40.0℃～100.0℃) |
| | | ±1.5℃ (100.1℃～180.0℃or-40.0℃～-60.0℃) |
Humidity | Humidity range | 20.0%RH～98.0%RH |
| |
Humidity fluctuation | ±1.0% RH |
| | Humidity uniformity | ±2.0％RH |
Material | Internal material | SUS304 stainless steel(1.2mm) |
| | External material | cold-rolled plate(1.2mm),powder coating |
| | Heat insulation | polyurethane foam(100mm)+glass wool(10mm) |
| | Fan | Centrifugal fan(Impeller Fan) |
| | Refrigeration compressor | hermetic compressor(Tecumseh) |
| | Cooling mode | air cooling |
| | Refrigerant | R404A,R23,R508 |
| | Evaporator | finned-tube exchanger |
| | Heater | nickel chrome strip heater |
| | Humidifier | Steam Humidifier |
| Size | Interior(mm) W*H*D | 300 X 300 X 250 22.5L |
| | Exterior(mm) W*H*D | 480x835x990 |
| | Weight | 95kg |
| Working Temperature | +5 ~ 35℃ |
| Power supply | 220V/AC 50/60Hz 12A |
| Controller | Standard: SANWOOD |
Sanwood Provide customized solutions:
1. Automatic water filling system
2. Explosion-Proof safety devices
3. Humidity control range: 10%RH ~ 98%RH
4. Power supply: Customized to any country
5. Humidity sensor: wet-dry bulb or electrical
6. New refrigerant: R449A, R508 Available
7. Cooling rate and heating rate: customized available
8. Controller: Sanwood self developed controller, or other brand available
9. Multi-point temperature monitor
Product Tags:
|
|
Mini Temperature Humidity Test Chamber ISO Artificial Climate Control Chamber Images
|
